1. How to remove scale from the food supplement machine

Pour 500ml of hot water into the mixing cup, pour acetic acid or a pack of scale cleaner, stir evenly, let the scale remover fully dissolve, and pour it into the water tank of the food supplement machine. The water tank of the food supplement machine can only be filled with about 200ml of water. The water will be poured out of the steam hole, so mothers should pour it slowly, don't be too anxious, and don't pour more water when you see a small amount of water gushing out.

After that, install the food supplement machine, turn on the cooking mode, and after the first cleaning, pour the remaining water in the mixing cup into the water tank for the second cleaning, about 2-3 times, and the water that comes out each time will be more and more Yellow, the water will be less and less. Finally, pour out all the water and clean the mixing cup, then pour in clean pure water, and cook for 3-5 times until the water in the mixing cup becomes clear.

The food supplement machine has a cleaning function, as long as the cup is installed on the whipping deck to start the whipping function. Cleaning in the sink is also very convenient, basically just brush it with a brush.

All parts except the motor can be cleaned in the dishwasher. To clean it yourself, warm water or a mild household cleaner diluted to the recommended concentration is recommended. Remember to descale regularly after using for a period of time. Detailed cleaning steps are available in the manual, you can refer to it.

This picture is provided by registered user "City of the Sky", copyright notice feedback

2. How to clean the water tank of the food supplement machine

1. Make sure the product is powered off.

2. Add a small sachet of citric acid (10g) to 200ml warm water. Note: Descale can also be done with a solution of 150 ml of water and 50 ml of white vinegar (8% acetic acid).

3. Pour a solution of acetic acid (or vinegar) and water into the water tank.

4. Cover the water filling port. Install the blade assembly and the jar lid on the motor unit (the lid is facing down), and set the fully assembled empty jar to the steaming state.

5. Turn the control knob to the steaming position. The steaming indicator lights up orange to indicate that the product is steaming, after 5-6 minutes of steaming, switch off and disconnect the product.

6. Pour out the used acetic acid (or vinegar) aqueous solution from the water tank, and rinse the water tank and mixing cup thoroughly with clean water several times.

7. Before using this product to process food again, please fill the water tank with 200ml of water, let the product steam in an empty cup for 20 minutes, and keep the lid of the water filling port open to prevent the growth of bacteria.