1. How to use the wall breaker

1. How to use the smart panel breaker

A wall breaker with a smart panel can usually achieve the function of one-click cooking, such as making soy milk, smoothies, rice paste and thick soup with one click. For this type of wall breaker, you only need to prepare the ingredients in the wall breaker recipe, then put them all into the container, then add the seasoning, and finally start the wall breaker, press the corresponding cooking button, and wait. The machine can be completed, and the overall operation is relatively simple. But when you first start using it, you have to spend some time to understand the specific function of each button, and how to make reservations and wifi.

The picture is provided by the registered user "Warm · Life Home", copyright notice feedback

2. How to use the traditional physical control wall breaker correctly

At present, there are not many traditionally controlled wall breakers on the market. The control method of such wall breakers is usually knobs, which are divided into different gears to control the stirring speed of the wall breaker, unlike the wall breakers with smart panels. You need to understand the function of each button, but you need to control the speed of stirring yourself. After preparing the ingredients of the wall breaker recipe, put them into the container, and then adjust the stirring speed as needed to make the dish.

2. Precautions for the use of wall breaker

What should be paid attention to before using the wall breaker

1. The wall breaker should be used on a flat and wide desktop, and should not be close to the edge of the desktop to prevent the wall breaker from moving and falling due to vibration during work.

2. Avoid using the wall breaker next to high temperature equipment, such as a gas stove that is cooking. The working wall breaker itself will release a lot of heat energy. If the nearby temperature is too high, it will not be conducive to the heat dissipation of the motor. In extreme cases, the motor may be damaged.

3. Before the mixing jar is installed on the main unit, liquid and foreign objects should be prevented from spilling onto the upper part of the main unit, so as to prevent foreign objects from entering the main unit and causing damage.

4. Before the wall breaker is turned on, please put it firmly, and the cup and lid must be installed in place. Some models can automatically detect whether the installation is in place.

Pay attention to the wall breaker during and after use

1. The motor of the wall breaking machine has high power, high speed and large heat generation. Therefore, the working time of the motor should not be too long, and it is best not to let the motor rotate continuously for more than 3 minutes. When continuous use is required, it should also be allowed to cool down for a few minutes before starting after every 3 minutes of operation.

2. When using the preset mode to make food, if you need to make it multiple times, you should let it cool down for about 15 minutes after each production, and then let it work again, which is more conducive to the protection of the motor.

3. When using the wall breaker, do not let the machine be in a dry state. When making food that needs to be cooked, you should add enough water.

4. When the power is on, please do not touch the cutter head with other tools. If the blade is stuck, the power should be cut off first, and then the foreign objects should be cleaned to prevent accidents.

5. After cooking, please do not touch the bottom of the stirring cup (heating cup) and the heating element. The temperature here is very high, and it is very likely to be scalded instantly.